product img

TDM-473W : 47” 2D/3D Broadcast and Post-production Monitor

TDM-473W features a passive micro-polarizing filter attached to the LCD panel in concert with passive circular polarizing 3D glasses for seamless 2D or 3D viewing of one or multiple monitors.
Full 12-bit processing delivers smooth gray scale and a built-in 3D LUT with preset or user definable (via imported 3D LUTs) color spaces allows for highly accurate color visualization in 2D or 3D modes.
Designed for broadcast, OB Van, production, and postproduction environments, the TDM-473W accepts a wide variety of SD and HD digital and analog video formats and includes the familiar TVLogic feature set.

TDM-473W

Choice:



Audio Level Meter Display

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Closed caption

Closed caption

Closed caption.

Blue Only / Mono

blue only

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

Focus Assist

Focus AssistFocus Assist

Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

H/V Delay

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Key Lock

Locks the knob or key control.

Marker

Marker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Range Error

Range ErrorRange Error

Anahlyzes the input signal’s Luma(Y’) and chroma information(C’) and if the input signal exceeds the designated minimum value and maximum value, the pixel shall blink. This function is to help the user to easily find out any unwanted levels of signals and for a better exposure setting.

Time Code Display

Time Code Display

Displays the Timecode information on the screen.

Waveform/Vector Scope

Waveform/VectorWaveform/Vector

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

1:1 Pixel Mapping Modes for SD/HD

Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

UMD

UMD

Displays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.

Display Spec.

 Size  47"
 Resolution  1920 X 1080 (16 : 9)
 Pixe Pitch  0.542mm
 Color Depth  1.06B
 Viewing Angle  2D:178°(H) / 178°(V) 3D:178°(H) / 20°(V)
 Luminance  400cd/m2
 Contrast Ratio  3D : 1200:1
 Display Area  1039.7 (H) x 584.8 (V) mm
Input
 2 X BNC  3G-SDI A/B Channel Input
 2 X HDMI  HDMI A/B Channel Input
Output
 2 X BNC  3G-SDI Output
Audio
 Audio In  Embedded Audio/Analog Stereo (Phone Jack)
 Audio Out  Analog Stereo (Phone Jack), Internal Speaker(Stereo)
FPGA Functions
 1:1 Pixel Mapping Modes for SD/HD,  Audio Level Meter Display,  Blue Only,  Focus Assist,  H/V Delay,  Key Lock,  Marker,  Mono,  Range Error,  Time Code Display,  UMD,  Waveform/Vector
Closed Caption
 CC-608 ANC,  CC-608 LINE 21,  CC-708
Calibration
 TVLogic Color Calibration Utility
Other Functions
 REMOTE   GPI (RJ45)
 REMOTE   TVLogic’s specification
 USB   Firmware update by USB cable
 Ethernet   Ethernet Control support
 Conversion
Options
  Carring Case,

TDM-473W : 47” 2D/3D Broadcast and Post-production Monitor



- Main Body :
1122 x 675 x 103.3 (mm) / 44.17 x 26.57 x 4.1 (inch)
- With stand : 1122 x 728 x 255 (mm) / 44.17 x 28.66 x 10 (inch)
- Weight : 36kg / 79.3lbs


  Product Brochure (1 Page)   Download
  Manual   Download
  Leaflet   Download
  Total Brochure   Download

Contact Us

If you have any questions, please contact our Technical Support staff. If you're a reseller interested in selling TVLogic product, please contact one of our offices worldwide. If you're a customer interested in purchasing TVLogic product, please contact one of our hundreds of authorized resellers worldwide.

Address

12F, ACE HIGH-END TOWER 8, 84, Gasan digital 1-ro, Geumcheon-gu, Seoul 153-797, Korea

Phone Number

+82-70-8668-6611

Email

support / sales